TIPS FOR BETTER HOME BREWING

If you start with inferior beans, then don't expect a good cup of coffee, regardless of the other measures you take!

a) Get good quality WHOLE BEAN coffee - each time you brew start with whole bean and grind at home. You can invest in a decent grinder that will not empty your pocket!

b) Keep your whole bean coffee stored properly. And that does not mean in the freezer - the freezer, due to changes in temperature and coffee being very porous, means that the coffee could be subject to moisture and absorb some of the flavors of other frozen items. Store your coffee in a nice airtight jar or just keep it in the bag you got it in, but in a cool, dry place away from direct sunlight.

c) GRIND your whole bean each time, and use ground coffee within 30 minutes or less of grinding. Of course right away is the best. Grind size and consistency matter quite a bit, as well. Grind too coarse and you will have a weak pot of coffee. Grind too fine and you will over-extract the coffee and it will taste bitter. Most drip coffee makers call for a medium to medium-fine grind. Unless you want to spend upward of $100 (roughly £80, AU$130 and Danish KR 600) on a quality automatic burr grinder, a manual hand mill is the most affordable way to achieve a nice, consistent grind, though they do require a small amount of manual labor. Blade grinders also work, but will produce inconsistent particle size, which can lead to over-extraction.

d) Making better coffee is all about eliminating variables, and one way to do that is to use the same amount of coffee per unit of water each time you brew. Using a digital scale to measure takes just a second and allows you to better compare how much coffee and water is used each time.

Ideally, a ratio of 1:20 (that's one part coffee to 20 parts water, or about 7.5g of coffee to 150mL of water) makes a fairly strong cup of coffee. That said, some people go as high as 1:14 or as low as 1:30. It's up to you to decide what tastes best, which is much easier to do (and replicate) once you remove all the guesswork.

e) Wet/pre-infuse your ground beans! Most automatic coffee makers don't properly prepare the coffee grounds for full extraction. Manual pour over cones (which are not unlike automatic drip machines) call for a preinfusion or the so-called "bloom." This preps the coffee by pouring hot water over the grounds to help release any remaining carbon dioxide gas left over from the roasting process. Skipping this step will allow the carbon dioxide to repel water during part of the brewing process, effectively making the brew weaker. To pre-infuse your coffee, insert a filter into the hopper and add your coffee grounds. Then use a kettle to preheat roughly 50 milliliters or quarter-cup of water to 200 degrees Fahrenheit. Slowly pour the heated water over the grounds, making sure to thoroughly wet all of them. Let this sit for approximately 45 seconds before starting the coffee maker.

f) Another step many automatic coffee makers skip is reaching optimal temperature. The desired brew temperature for drip coffee is between 195 and 205 degrees Fahrenheit. Newer, high-end models sometimes have a manual temperature adjustment, but older, cheaper makers do not. To make sure your coffee maker gets hot enough, run it without any coffee in the hopper and use a thermometer to measure the temperature. If you can, try to measure the temperature during the brewing process, as the water temperature will drop as it passes through the hopper and into the carafe beneath. If it never reaches at least 195 degrees Fahrenheit, see if pre-boiling your water in a kettle helps. Keep in mind, however, you do not want to exceed 205 degrees, as it will "burn" the coffee. If this doesn't work, you might want to consider upgrading your coffee maker!

g) The quality of the water you use is another often overlooked aspect of brewing coffee. Using hard water that's full of minerals won't bond well with the dissolved particulates from the coffee, leading to an under-extracted, weak coffee. Not only that, this higher mineral content is what also leads to buildups in your coffee maker, such as lime deposits. This will require you to descale your coffee maker more often.

On the other hand, heavily filtered or distilled water can be just as destructive for your equipment. While it doesn't cause as much buildup, Seattle Coffee Gear explains that its lack of ions and mineral content will force the water to "leach minerals out of the metal components and degrade the machine's performance over time." Plus, with more room for bonds, distilled water can easily lead to over-extraction.

You want water that's roughly in the middle of the spectrum, with a mineral balance of approximately 150 parts per million. You can achieve ideal water for your coffee brewing by using distilled water and adding capsules from Third Wave Water, but for the casual drinker lightly filtered water (from a water filter pitcher or a refrigerator's filtered water) will suffice.

Go back to point a) and remember you can get the best coffee from us here @ The Nomad & The Bean.

BUY WHOLE BEAN NOMAD & BEAN ROAST NOW! 

*information gathered from online articles including from cnet.